SV-FTBO is a floating tool, which is used to remove uneven contour (edge) burrs generated during machining, and can automatically compensate the difference between the actual contour of the workpiece and the program.
Through the floating mechanism of the tool holder, SV-FTBO can move and process along the uneven edge of the workpiece, so that the tool has an edge compensation of 5~10mm.
The pressure at the edge of the workpiece can be adjusted by the adjusting mechanism in the tool holder, and the tool can be directly driven by the spindle of the machine tool. The floating deburring tool holder mainly solves the problem that the rigid chamfering tool can not be machined in some places, and the chamfering in some places is very big. At the same time, it can improve the consistency of the chamfer size, and then optimize the finish through parameter adjustment.
SV-FTB0 Floating Deburring Holder is a floating deburring tool fixture designed specifically for removing burrs from the edges of workpieces during mechanical processing. The following is a clear answer about SV-FTB0 Floating Deburrying Holder, including its structure, characteristics, usage methods, technical specifications, and maintenance information:
1, Definition and purpose
Definition: SV-FTB0 Floating Deburring Holder is a floating deburring tool fixture that can compensate for small deviations of workpieces or tools during the machining process, ensuring high precision and stability in the deburring process.
Usage: Mainly used for deburring processing of various metal and non-metal materials, such as steel, aluminum alloys, plastics, etc.
2, Structural characteristics
Floating Design: The SV-FTB0 Floating Deburring Holder adopts a floating mechanism, allowing the tool to make slight position adjustments during the machining process to adapt to changes in the workpiece surface.
High precision: The floating design can compensate for small deviations, ensuring high precision and stability in the deburring process.
Good stability: The floating mechanism can absorb vibrations and impacts during the machining process, maintaining the stability of the cutting process.
3, Usage
1. Preparation phase
Confirm compatibility: Ensure the compatibility between SV-FTB0 Floating Deburring Holder and the machine tool and deburring tool.
Check the status of the fixture: Check whether all components of the fixture are intact and whether there is any damage or wear.
Cleaning and lubrication: Clean the fixture and lubricate the lubricated parts according to the manufacturer's requirements.
2. Installation phase
Installation fixture: Install the SV-FTB0 Floating Deburring Holder into the corresponding position on the machine tool to ensure secure installation.
Install the deburring tool: Install the deburring tool onto the fixture to ensure a tight fit between the tool and the fixture interface.
3. Adjustment stage
Adjust the floating range: According to the processing requirements, set the initial position and range of the floating mechanism through the adjustment device.
Set cutting parameters: Select appropriate cutting parameters such as cutting speed, feed rate, etc. based on the workpiece material and processing requirements.
4. Processing stage
Start the machine tool: Start the machine tool, place the workpiece in the machining position, and ensure that the workpiece is firmly fixed.
Start machining: Start the deburring program of the machine tool and start the deburring process. Pay attention to the effect of removing burrs and the condition of the machine tool during the processing.
5. Maintenance and upkeep
Regular cleaning: Clean the fixture regularly to remove impurities such as oil and dust from the surface.
Lubrication maintenance: According to the manufacturer's requirements, regularly lubricate the lubrication parts of the fixture.
Inspection and replacement: Regularly check the wear of various components of the fixture. If there are damaged or severely worn components, they should be replaced in a timely manner.
4, Technical specifications (example, specific numbers may vary depending on different manufacturers and models)
Fixture diameter range: Depending on the specific model and purpose, the fixture diameter range may vary to accommodate different sizes of deburring tools.
Floating range: The adjustment range of the floating mechanism is usually set according to specific needs to ensure that small deviations can be fully compensated during the machining process.
Material: SV-FTB0 Floating Deburring Holder is usually made of high-strength and wear-resistant materials to ensure its stability and durability during use.
Please note that the above information is based on a general understanding of SV-FTB0 Floating Deburring Holder, and specific technical specifications and usage methods may vary depending on different manufacturers and models. In actual use, please refer to the specific product manual for operation.
){kind=link}